To ensure problem-free pumping of the piped slurry to the storage tank, we recommend a special discharge pipe in hot-dipped galvanized steel.
The pipe hangs vertically down from the edge of the tank's inside, where it extends almost to the bottom of the tank to prevent splashing over the edge.
On the external side, a solid pipe is placed vertically along the tank wall. This piping can be insulated up to full height and if required be fitted with an electric heating cable to allow discharge in winter during hard frost.
We offer two models of discharge pipes:
An uninsulated pipe made of hot-dipped galvanised steel with automatic safety valve (see the photo to the right as well as the schematic below)
An insulated pipe made of hot-dipped galvanised steel with inbuilt, electric heating cable and automatic automatic safety valve. (see the schematic below)
Ferrier Pumps has brought about a successful solut...
Following an intricate diving operation, ESD (the ...
Situated approximately halfway between two of Amer...